Vandal Resistant

DualPROX^TM DP2200/V Reader

Vandal Resistant Proximity Card Reader

The DualPROX^TM Vandal resistant reader is housed in marine grade stainless steel and has a read range of up to 50mm.

The reader is available with a number of different data output formats dependant on the host system it is connected. It will connect directly to PAC Easikey and PAC 1000, 2000, 2100 and 2200 range controllers.

The vandal resistant reader will read PAC tokens and cards, it has exceptional reading range with the new PAC token.

Key Benefits

	Surface mounted stainless steel vandal resistant reader
	Reads PAC tokens and cards - including new 125kHz cards and tokens
	Connects directly to PAC controllers
	Simultaneous PAC and Wiegand data outputs
	Selectable 26-bit of 44-bit Wiegand data output
	3 mm Tri-colour LED
	Fully encapsulated - IP66
	Flexible and low cost alternative to PAC readers

Technical Specification

Size:	103 mm High x 103 mm Wide x 16 mm Deep
Colour:	Stainless Steel
Material:	316 Marine Grade Stainless Steel
Reading range:	Up to 50 mm dependant on the type of token or card
Operating Temperature:	-30°C to + 50°C Ambient
Rating:	IP 66 - suitable for outdoor and indoor use
Supply voltage:	9 V dc to 24 V dc (Nominal 12 V dc + 100% or - 50% )
Total supply current:	< 100 mA
Data Outputs:	Selectable 26-bit or 44-bit Wiegand AND PAC Serial Data
Cable length supplied:	flying lead of 0.5 metres
Connections:	8 core screened
Cable lead gauge:	7/0.2, 0.22 mm² stranded
LED Operation:	One Tri-Colour LED
	LED normally red – blinks when any token is read Green on active low from the host controller (active low)

Wiring connections:

Red +V

Black 0V

White Data 1

Green Data 0

Blue PAC Data Signal

Yellow LED

Orange Select Wiegand 26-bit (to 0V) or

44-bit Data Output (to +V)

Brown No Connection

Key Benefits

Technical Specification

Information Request Form